With the rapid development of modern industry, the maintenance methods of powder extrusion packaging machines are also rapidly improving. In the packaging industry, with the improvement of automation technology, all kinds of packaging machinery are changing to the direction of automation, and the powder extrusion packaging machine is no exception. For users, how to maintain the powder packaging machine after purchase?
The basic maintenance and daily maintenance of the powder packaging machine focus on tightening clean and smooth parts, and are based on the maintenance procedures required during and after mechanical operation. Important tasks include tightening and inspection of all relevant components and their cleaning tasks, complete inspection of clutches, transmissions, transmission components and brake components of the powder packaging machine.
The maintenance point of powder packaging machine is to clean by adjusting the failure risk and the degree of wear of each part, stop the diagnostic inspection and status reflection of the parts that affect the performance of the powder packaging machine and the parts with fault symptoms, and complete the necessary adjustment and troubleshooting. task to extend the life of powder packaging machines without breaking away from daily inspections.
The maintenance of the powder packaging machine also needs to be different according to the season. For example, before the summer or winter every year, it is necessary to focus on the maintenance of the power system, the conveying system and the control system. The inspection of the control system control cabinet must be completed under the guidance of the after-sales service technicians of the powder packaging machine. In addition, the winter vacation needs to suspend the machine, and at the same time carry out the task of moisture-proof and anti-corrosion.
Precautions for maintenance of powder packaging machine:
1. Lubrication work. Equipment maintenance personnel should regularly lubricate the gear meshing points, bearing oil filling holes, and various moving parts of the powder packaging machine, and the reducer must not run without oil. When adding lubricating oil, be careful not to put the oil tank on the rotating belt to avoid the belt slipping or premature aging damage.
2. maintenance. Before using the powder packaging machine, check whether the screws of each part are loose, otherwise it will affect the normal remote control rotation of the whole machine. The electrical parts should be waterproof, moisture-proof, anti-corrosion, and rat-proof to ensure that the electric control box and terminals are clean to prevent electrical failures. After shutdown, the two heat seals should be in the open position to prevent damage to the packaging material.
3. Cleaning work. Generally speaking, after shutdown, the metering part should be cleaned in time, and the heat sealing body should be cleaned regularly to ensure that the sealing line of the packaged product is clear. The scattered materials should be cleaned up in time to facilitate the cleaning of the machine parts of the powder packaging machine, so as to better prolong its service life. At the same time, the dust in the electric control box should be cleaned regularly to prevent electrical faults such as short circuit and poor contact.
